Through nearly twenty years of improvement on the basis of
digesting the imported equipment, this product has been a mill with
long use, low energy consumption and high efficiency compared with
same type product, it has the advantages of less electricity power
consumption, large crush capability, wide suitability, compact
structure long trouble-free operation and easy cleaning, etc..
This machine can crush various material and is widely used for
organic chemical, inorganic chemical, food, inorganic chemical and medical industries.
For many years, we have been supplying customers with high quality
products、excellent after-sales service and timely spare parts and
have achieved scope for expanding the market.
2. Introduction of structure
There are four rotor positions for this eddy mill that can be put
in 3 ~ 4 rotors. Each rotor consists of fourteen blades and two
splints to form fourteen crushing chambers. After material is sent
into the crushing chamber by imported high-speed distributor, the
high-speed revolving rotors can make air generate countless
ultrasonic eddy current and high-frequency pressure produced by the
eddy current, which causes force vibration to crush material.
Material is transferred from the first stage to the second stage
and then the third stage, making nearly 90% material has the
fineness of 80 ~ 100 mesh. If four rotors are mounted, the fineness
of brittle material can reach 2m, and the material that is even
emplastic or elastic material also can be processed. In addition,
the temperature of material rises very little during operation,
which is quite advantageous for crushing heat sensitive raw
materials of chemical industry.
1.Process flow and equipment configuration
Process flow: constant material is fed to mill evenly through
feeder. The removed mixture of material and air is transmitted into
cyclone separator, and the material is separated from air, then
tail gas enters dust collector for secondary separation to remove
air.
In order to improve crushing efficiency, it is of vital importance
to select proper material feeder, separator and dust collector. Our
configuration of vibrating material feeder and rotary disc material
feeder are well applicable. We also produce auxiliary equipment
made of stainless cyclone separator and bag dust collector for
customer’s choice.
The particle size of feeding feed-in material should be controlled
at 2 ~ 10mm generally. If the particle size of the material that
needs to be crushed is beyond the pale of 2 ~ 10mm, additional
primary crushing equipment is recommended.
2.Technical parameter
No. | Parameter | Unit | Actual measurement data |
1 | Rotor number | piece | 3 | 4 |
2 | Rotary speed | round/min | 4000 |
3 | Motor power | Kw | 30 |
4 | Normal electric current | Amp. | 37 | 45 |
5 | Crushing capacity for aminoplast powder | Kg/hr. | 500—800 | 300—600 |
6 | Fineness for aminoplast | mesh | 80—100 | 120—200 |
7 | Exha |
